Plan Your Roofing Project.
Compare roofing materials, repair options and local project considerations across Texas. Ask about a contractor introduction, subject to availability.
The Guild Collective Difference
A roofing quote should explain the system beneath the finished surface: decking, underlayment, flashing, ventilation and installation details. Our guides help homeowners compare those choices. Contractor introductions are in development and depend on a suitable recipient being available.
We look for contractors who treat licensing, insurance, and a real portfolio as table stakes — and who understand that the thing that actually determines whether a roof lasts 15 years or 35 is how it's built before the shingles go on, not how it looks the day the truck pulls away.
Homeowners planning roofing work in Southlake, Frisco, Flower Mound, Bellaire, The Woodlands, and Lakeway can use these guides to compare project requirements. That means surviving 1-inch hailstones moving at 60 mph during a DFW spring storm. It means surviving the kind of UV bombardment and 100-degree heat that degrades lesser shingles from above while poor attic ventilation bakes them from below. And it means surviving the scrutiny of an HOA architectural committee that has opinions about every color, every ridge line, and every drip edge detail visible from the street.
Three Details to Discuss With Your Roofer
1.Premium Materials Only — Class 4 Impact-Resistant Systems
For hail-exposed homes in Frisco, Southlake and Flower Mound, compare impact-resistant architectural shingles with other suitable systems. Ask for the product’s test rating, installation requirements and warranty terms. Insurer discounts and eligibility vary; confirm any savings directly with your insurer before budgeting for them. For premium applications, compare standing seam metal, clay tile and concrete tile with your roofer, including structural suitability, maintenance and warranty terms.
2.Proper Underlayment and Decking — What Goes Under the Shingles Matters More Than the Shingles
Felt paper is the industry's most common underlayment. It works. It's also the minimum, and in Texas, minimum isn't good enough. Ask which underlayment and water barriers the chosen roofing system and local exposure require, including eaves, valleys and penetrations. Before new shingles are installed, ask how the contractor will inspect decking for rot, delamination, soft spots and spacing, and how any repairs will be documented and priced. A $15,000 roof laid over a deteriorated deck is a re-roof in five years. We'd rather tell you that upfront.
3.Engineered Ventilation — The Step That Gets Cut on Cheap Installs
Ask how the roofer will assess intake, exhaust, blocked airflow paths and the condition of the roof deck. Ventilation requirements depend on the roof assembly, applicable design requirements and manufacturer instructions. Confirm how any proposed changes will be calculated, documented and included in the written scope.
Roofing Systems at a Glance
Full Roof Replacement — Residential and Light Commercial
Complete tear-off and replacement from decking inspection through ridge cap. Confirm who handles permitting, removal and final inspections in the written contract. The full system: decking, ice-and-water shield, underlayment, drip edge, shingles or metal panels, flashing, ventilation, and ridge cap — executed as a system, not a checklist of line items.
Storm Damage Repair and Insurance Claims
Texas sees more hail damage annually than almost any other state — DFW alone accounts for hundreds of millions of dollars in roofing losses in a typical storm season. Ask prospective roofers about post-storm inspection experience and photographic damage reports. No inflating, no false claims — just accurate documentation and proper repair scopes.
Metal Roofing Systems
Standing seam metal, corrugated metal panels, and stone-coated steel roofing systems are the fastest-growing category in Texas's premium residential market — and for good reason. Properly installed metal roofing carries 40- to 50-year lifespans, Class 4 hail ratings, best-in-class wind resistance, and energy efficiency advantages that matter in a Texas cooling-dominated climate. Ask for references for the specific metal system and building type you are considering.
Premium Shingle Roofing
Architectural and dimensional shingles in Class 4 impact-resistant configurations from manufacturers including GAF, Owens Corning, CertainTeed, and Malarkey. Proper installation with manufacturer-specified nail patterns, starter strips, and ridge cap — because improper fastening is one of the most common causes of wind-related shingle failures in Texas severe weather events.
Tile Roofing — Clay and Concrete
Clay tile and concrete tile are staples of the luxury Texas suburban market — architecturally distinctive, long-lasting, and demanding to install correctly. Tile systems require reinforced decking, specialized underlayment systems, and fastening methods that account for Texas's wind loads. Ask for tile installation references and an explanation of the proposed flashing, underlayment and fastening details.
Flat and Low-Slope Roofing — TPO and Modified Bitumen
Modern flat and low-slope roofing for commercial properties and contemporary residential construction. TPO (thermoplastic polyolefin) membrane systems offer heat-reflective surfaces well-suited to Texas cooling loads. Modified bitumen systems deliver proven performance on traditional low-slope applications. Proper drainage design, membrane seaming, and penetration flashing are the technical details that separate a 20-year flat roof from one that leaks at year three.
Roof Inspections and Maintenance
Annual and post-storm inspections, flashing repair, vent boot replacement, pipe collar sealing, and ridge cap resecuring — the maintenance work that catches a $400 problem before it becomes a $14,000 one. Ask whether the inspection includes a written report and photographs.
Gutters and Drainage Systems
Seamless aluminum and copper gutters, gutter guards, downspout extensions, and underground drainage tie-ins. Roofing and drainage are one system — water that leaves the roof properly but piles against the foundation because the gutters are undersized or clogged creates its own category of expensive damage.
The Texas Roof Reality
If you've owned a home in Texas long enough, you know the drill. The spring hailstorm rolls through, the adjusters arrive, half the neighborhood gets a new roof, and two years later, half of those roofs are already showing granule loss, soft ridges, and lifted shingles. Not because of another storm. Because of what happened in between.
Texas is in Hail Alley — the collision zone between cold air masses from the Rockies and warm, humid air from the Gulf of Mexico that generates more large-hail events per square mile than almost anywhere in North America. DFW sits near the center of it. A hailstone doesn't need to crack a shingle to damage it — impact fractures the asphalt mat beneath the granule surface, accelerating water infiltration and reducing the shingle's remaining useful life by years. A properly documented Class 4 impact-resistant system is the most defensible investment a Texas homeowner can make.
But hail is only part of the story.
Use these local weather considerations to ask specific questions about the system proposed for your home.
Heat and UV Degradation
Texas summers run 90-plus days above 90°F in most of our markets, with peak temperatures regularly exceeding 100°F. Asphalt shingles absorb that heat — surface temperatures on a dark shingle in direct Texas sun can exceed 160°F. Every thermal cycle between day and night stresses the asphalt and accelerates oxidation. Class 4 shingles with SBS (styrene-butadiene-styrene) modified asphalt are specifically engineered to handle thermal cycling better than standard shingles. Pair that with reflective underlayment and proper attic ventilation, and you extend system life measurably. Skip those elements, and you're on a 12-to-15-year replacement cycle instead of 25-to-30.
Wind Uplift
Texas severe thunderstorms routinely produce 60–80 mph straight-line winds, with supercell events pushing well beyond that. Shingle wind resistance depends almost entirely on how they're fastened. Code in most Texas jurisdictions calls for four nails per shingle in standard zones, but ask the installer to follow the manufacturer’s fastening pattern for the product and wind exposure, including correct nail placement.
Gulf Coast Wind and Rain
Bellaire and the broader Houston market face a different category of wind risk: Gulf Coast tropical systems and the remnant bands from Gulf hurricanes. These events bring sustained high winds combined with horizontal, wind-driven rain that exploits any weakness in flashing, step flashing, or roof-to-wall transitions. Installation details that pass inspection in North Texas may not be adequate for a Houston coastal exposure. For Bellaire and The Woodlands, seek references from projects with comparable Gulf Coast weather exposure.
Humidity, Algae, and Mold
Houston's humidity is a roof's enemy in a different way than hail. Persistent moisture promotes the growth of gloeocapsa magma — the blue-black algae streaking visible on roofs across Houston suburbs — as well as mold in roofing materials and attic assemblies. Copper-containing granules in premium shingles inhibit algae growth significantly. Proper ventilation prevents the moisture accumulation in attic spaces that leads to mold on sheathing and structural members.
Flash Freezing and Ice Damming
North Texas doesn't get sustained winters, but it gets flash freezes — rapid drops from 60°F to single digits over 24 hours. When snow or ice melts unevenly on a poorly ventilated roof, the meltwater refreezes at the eaves before it can drain, creating ice dams that force water under shingles and into the decking. Self-adhering ice-and-water shield at all eaves — not felt paper — is the correct preventive measure, and its suitability should be assessed for the chosen system and local conditions.
Find Your Local Guild Chapter
Our chapters are geographic roofing guides, not physical offices or a confirmed contractor roster. Explore local project considerations and questions to ask a roofer. Any contractor introduction depends on a suitable independent contractor being available.
Katy Chapter
TXKaty
Local roofing conditions, permits and HOA planning
Southlake Chapter
TXSouthlake
Trophy Club, Colleyville, Keller, Grapevine
Frisco Chapter
TXFrisco
Allen, McKinney, Prosper, Celina
Flower Mound Chapter
TXFlower Mound
Lewisville, Coppell, Argyle, Highland Village
Bellaire Chapter
TXBellaire
West University Place, River Oaks, Meyerland, Braeswood
The Woodlands Chapter
TXThe Woodlands
Spring, Conroe, Tomball, Kingwood
Lakeway Chapter
TXLakeway
Bee Cave, Steiner Ranch, West Lake Hills, Cedar Park
Select your area for roofing planning guidance. Confirm current municipal requirements and HOA approvals for your property.
Ask About a Contractor Introduction
Tell us about your project to ask about an introduction. A suitable independent contractor and their availability must be confirmed separately. Agree any assessment, estimate, fees and scope directly with the contractor.
Independent roofing guidance for homeowners and property owners in Texas.
Ask about a contractor introduction
Tell us about your project. A suitable independent contractor must be confirmed before an introduction can be made. Contractor availability, an estimate and a response time are not guaranteed.